Ofert
Combination / Storage Boiler
Combination / Storage Boiler

£1,600.00

Regular price: £1,800.00

£1,333.33

Regular price: £1,500.00

szt.

Electric combination boiler Single Phase

Availability: 10+
Dispatched within: 48 Hours
Delivery: The price does not include any possible payment costs check the delivery methods
Gross price: £1,450.00
incl. 20% TAX, excl. shipping costs

Regular price:

1450.00
The lowest price during 30 days prior to the reduction:
Net price: £1,208.33
excl. 20% TAX, excl. shipping costs

Regular price:

The lowest price during 30 days prior to the reduction:
quantity szt.

product unavailable

add to wish list
* - Field mandatory
Vendor: Elterm
Product code: 1CEC-34576

Description

6-12kW (CH)/ 14kW (HW) -Single 

 

"Concept Heating" Line

  • AsC - SilverLine series
  • Electric heating boiler with build-in instantaneous flow heater
  • Modern heating block with several power variants
  • There is no need to install the additional domestic hot water tank
  • Cost and space-saving compared to boiler + tank solution
  • Cooperates with GSM and Wi-Fi controllers
  • Energy class A/D

This particular 6kW/12kW electric combination boiler is designed for small flats (one—or two-bedroom flats). On the hot water side, no water cylinder is required.

The 6-12kW part responsible for central heating/underfloor heating can work in areas up to 90 2m. 

And the 14kW is the build-in instantaneous domestic water flow heater.

Low-voltage or 0V external thermostats are required to control the boiler's performance. These are widely available and can be purchased. The part responsible for hot water is an instantaneous water heater independently connected to provide hot water. The 15kW unit is designed to work with up to 3/4 hot water points, but it is essential to remember that the best option is to use one hot water point at a time or two taps of hot water at a time.

The best temperature of the instantaneous water heater performance is 43 -48 degrees C.

PLEASE NOTE: THE WATER DESCALER ON THE HOT WATER PART NEEDS TO BE INSTALLED TO AVOID LAMESCALE AND DAMAGE/BLOCKAGE TO THE INSTANTANEOUS WATER HEATER. WE ALSO HIGHLY RECOMMEND USING A MAGNETIC FILTER IN YOUR CENTRAL HEATING INSTALLATION.

We supply appliances ready for high-pressure systems. Installing on the open-went system is optional (only at C.H.). Don't hesitate to contact us for advice. Domestic water installation must be the primary pressure. 

 

 

Shipping costs The price does not include any possible payment costs

Shipping country:
up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl