Electric heating boiler with built-in instantaneous flow heater
Modern heating block with several power variants
There is no need to install the additional domestic hot water tank
Cost and space-saving compared to a boiler + tank solution
Cooperates with GSM and Wi-Fi controllers
Energy class A/D
This particular 6kW/12kW electric combination boiler is designed for small flats (one—or two-bedroom flats). On the hot water side, no water cylinder is required.
The 6-12kW part, responsible for central heating/underfloor heating, can work in areas up to 90 m².
The 14kW is a built-in instantaneous domestic water flow heater.
Low-voltage or 0V external thermostats are required to control the boiler's performance. These are widely available and can be purchased. The part responsible for hot water is an instantaneous water heater independently connected to provide hot water. The 15kW unit is designed to work with up to 3/4 hot water points, but it is essential to remember that the best option is to use one hot water point at a time or two taps of hot water at a time.
The best temperature for the instantaneous water heater performance is 43 -48 degrees C.
PLEASE NOTE: THE WATER DESCALER ON THE HOT WATER PART NEEDS TO BE INSTALLED TO AVOID LIME SCALE AND DAMAGE/BLOCKAGE TO THE INSTANTANEOUS WATER HEATER. WE ALSO HIGHLY RECOMMEND USING A MAGNETIC FILTER IN YOUR CENTRAL HEATING INSTALLATION.
We supply appliances ready for high-pressure systems. Installing on the open-went system is optional (only at C.H.). Don't hesitate to contact us for advice. Domestic water installation must be the primary pressure.
